background image

For your information Orbit Irrigation Products, Inc. 
(“Orbit

®

”) has established its Terms of Use for OrbIT 

SPrInkler SySTem DeSIgner™. 

dIsClaIMeR

The OrbIT SPrInkler SySTem DeSIgner™ 
Application (“application”) and OrbIT SPrInkler 
SySTem DeSIgner™ Output (“output”) are provided 
by Orbit

®

 on an “as is” basis. you, as the user, agree that 

the use of the application and output is at the user’s own 
risk. neither Orbit

®

, nor its affiliates, officers, directors, 

employees, consultants or agents warrant that the 
application will be uninterrupted or error-free. nor do they 
make any warranty as to the output that may be obtained 
from the use of the application, or as to the accuracy, 
reliability or currency of any information, content, or 
service provided. Orbit

®

 may withdraw the application 

and its content at any time without further claim by the 
user. 

The sole intent of the application and output is to provide 

homeowners with a fast, efficient method by which to 

design and purchase an outdoor cold water sprinkler 
system for personal installation and use. The output 
represents one possible way of many to install a sprinkler 
system. This software, the resulting schematics, parts 
list, and assembly guide are intended to be used as a 
help guide only. The user is responsible for reviewing the 

design and methods of installation with a qualified local 

expert prior to installation. Although every effort has been 
made to ensure that the application and output produce 
accurate designs, parts lists, and assembly instructions, 
the user is responsible for verifying all details, dimensions, 
quantities, methods, and conformance to local codes, 
and shall be solely responsible for the same. While 
the application and output follows generally accepted 
irrigation design and installation practices, state and 
local codes and practices vary widely, and Orbit

®

 shall 

be held harmless for any and all errors. The user is solely 
responsible for learning the methods of installation, 
verifying code and permit requirements, including those 

related to backflow prevention, and checking for all 

possible utilities and hazards prior to digging or trenching. 

The application and output cannot and do not presume 

to take into account site specific factors such as slope, 

soil type, vegetation type, local climate or property 
peculiarities such as location of property lines, utilities, 
structures, window wells, stair wells, fences, footings, 
foundations, driveways, sidewalks, trees, shrubs, pools, 

ponds or other physical factors which may materially 
affect design, installation, performance, safety, or code 
requirements for a sprinkler system. The user is solely 
responsible for identifying, evaluating and addressing all 
risks associated with designing, installing and maintaining 
any system which derives from the use of the application 
or output. 

OrbIT

®

 mAkeS nO rePreSenTATIOnS Or 

WArrAnTIeS OF Any kInD, eXPreSS Or ImPlIeD, AS 
TO THe COnTenT Or mATerIAlS InClUDeD On THe 
APPlICATIOn, THe OPerATIOn OF THe APPlICATIOn, 
Or THe OUTPUT PrODUCeD FrOm THe 
APPlICATIOn. TO THe FUll eXTenT PermISSIble by 
APPlICAble lAW, OrbIT

®

 eXPreSSly DISClAImS All 

WArrAnTIeS, eXPreSSeD Or ImPlIeD, InClUDIng, 
bUT nOT lImITeD TO, ImPlIeD WArrAnTIeS OF 
SellerS, FITneSS FOr A PArTICUlAr PUrPOSe, 
Or nOn-InFrIngemenT. In nO eVenT SHAll OrbIT

®

 

be lIAble FOr Any DIreCT, InDIreCT, InCIDenTAl, 
SPeCIAl, eXemPlAry, PUnITIVe Or COnSeQUenTIAl 
DAmAgeS (InClUDIng WITHOUT lImITATIOn, lOSS 
OF USe, lOST PrOFITS Or lOST DATA) WITHOUT 
regArD TO THe FOrm OF Any ACTIOn, InClUDIng 
bUT nOT lImITeD TO, COnTrACT, neglIgenCe, TOrT 
Or OTHer legAl THeOry, ArISIng FrOm THe USe 
OF THe APPlICATIOn Or OUTPUT. 

IntelleCtual PRoPeRtY notICe

OrbIT SPrInkler SySTem DeSIgner™ is a trademark 
of Orbit

®

. Orbit’s trademarks may not be used in 

connection with any product or service that is not Orbit’s 
without express written permission. 

All content included in the application, including all logos, 
graphics, photographic images, illustrations, paintings, 
text and software is the sole and exclusive property 
of Orbit

®

 and is protected by U.S. and international 

intellectual property laws. All software used on this 
application is the property of Orbit

®

 or its software 

suppliers. The compilation of the content on this 
application is the exclusive property of Orbit

®

. Any use 

of this content, except for the express purpose of linking 
back to the application, is forbidden. Any reproduction, 

modification, distribution, republication or display of 

content is strictly prohibited. 

In the event the provisions herein are void or voidable, 
the remainder of the terms of use shall be in full force and 
effect. 

oRBIt sPRInKleR sYsteM 

leGal notICe

Summary of Contents for ORBIT SPRINKLER SYSTEM DESIGNER
































Reviews: