background image

     

U.L. LISTED – Hydromassage Bathtubs

IAPMO LISTED – Uniform Plumbing Code

U.L. LISTED – Pumps

IAPMO LISTED  –                                                                 

Uniform Swimming Pool, Spa & Hot Tub Code 

HYDRO SYSTEMS, INC.

, 29132 Avenue Paine, Valencia, CA 91355  |  661-775-0686  |  

F

ax: 661-775-0668

sales@hydrosystem.com  |  www.hydrosystem.com

1)

Any items manufactured by other companies and installed by HYDRO SYSTEMS, INC. 

S

uch items may carry

warranties offered by the manufacture

r

 of the original items.

2)

Problems resulting from failure to comply with installation instructions or drawings, or improper installation.

3)

Problems resulting from abuse, misuse, negligence or accident by any party other than HYDRO SYSTEMS, INC.

such as, but not limited to, damage to parts by installers.

4)

Problems resulting in whole or part from alteration or modification of these products by any party.

5)

Metal failures due to chemical corrosion.

This warranty is provided to you as part of your purchase order. It gives you specific legal rights. You should keep 

it in a safe place along with your purchase order.

U

T

L

LIS ED

2125

UL

LISTED

5979

8

This limited warranty is extended to the first user or the original retail purchaser for a period of 

t

en (10) 

y

ears on the 

b

athtub, 5 

y

ears on 

e

lectronics and 2 years on the air channel, plumbing, and labor to replace electronics or any other 

repair that is covered from date of purchase, and is not enforceable by any other party. HYDRO SYSTEMS, INC. 

warrants that the system and/or bathtub is free from defects in the  workmanship and/or materials. 
This limited warranty does not include any other items not manufactured by HYDRO SYSTEMS, INC. HYDRO 

SYSTEMS, INC. does not assume liability for the finish or the wearing quality of any plated product. No dealer or other 

person has any authority to make any warranties or representations concerning HYDRO SYSTEMS, INC. or its products. 

Accordingly, HYDRO SYSTEMS, INC. is not responsible for any such warranties or representations. THERE ARE NO 

WARRANTIES BEYOND THE DESCRIPTION ON THE FACE HEREOF. NO WARRANTY OF MECHANTABILITY, 

FITNESS, NOR OTHER WARRANTY (WHETHER EXPRESS, IMPLIED OR STATUTORY) IS MADE BY HYDRO SYSTEMS, 

INC., EXCEPT THAT IT WARRANTS THE GOODS TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP 

IN NORMAL USE AND SERVICE AS DESCRIBED ON THE FACE HEREOF.

WARRANTY OBLIGATIONS OF HYDRO SYSTEMS, INC.:

Should a defect in workmanship and/or material in any item covered by this warranty become evident during the term 

of the warranty, then upon the consumer following the procedures set forth below, HYDRO SYSTEMS, INC. at its 

opinion, will repair or replace such item at its own cost and expense. HYDRO SYSTEMS, INC. is not, however, responsible 

under this warranty for any cost of shipping or transportation or the equipment or parts thereof to or from the Service 

Department. Also, HYDRO SYSTEMS, INC. is not liable for any loss of time, inconvenience, incidental expenses such as 

telephone calls, labor or material charges incurred in connection with the removal or the replacement of the 

equipment, or any other incidental or consequential damages, unless otherwise prohibited by applicable State law.

PROCEDURES TO BE FOLLOWED TO OBTAIN WARRANTY SERVICE:

Upon discovery of any defect or malfunction, notify the supplier/installer and HYDRO SYSTEMS, INC. Service 

Department, 29132 Avenue Paine, Valencia, C

A

 91355

,

 

t

elephone: (661) 775-0686, within (10) ten days and include a 

description of the malfunction or defect, the Hydro Systems distributor

'

s name and purchase order number or the

5

-

digit bathtub serial number. The bathtub serial number can be found on the warranty card or on the model card

located on the underside of the bathtub.
1) Upon inspection, HYDRO SYSTEMS, INC. at its option will repair or replace any defective or malfunctioning part of

its system or bathtub. If repairs cannot be made on site, HYDRO SYSTEMS, INC. at its opinion will repair or replace at

the factory. However, the cost of removal or installation of a replacement system and cost of transportation to and

from HYDRO SYSTEMS, INC. are not covered. All parts, labor and materials necessary to repair the system or bathtub

are covered except parts excluded below.

EXCLUSIONS – THIS WARRANTY DOES NOT COVER:

INSTALLATION  INSTRUCTIONS

Summary of Contents for Ston Series









Reviews: