8
9
Page 11
Safety beam connection (optional)
– Fig.16
Remark:
1. Flash (Caution Light) should be less than 25W.
2. PB (External Push Button) should be 'N.O'.
Figure 15
Figure 16
Other terminal introduction and application
1
.
The O/S/C interfaces available. (Fig. 17, Fig. 18)
Add a new O/S/C button to operate the door.
2. Flash light function. (Fig. 17, Fig. 18)
There are corresponding interfaces for this function and provide 24v-35v flash light voltage.
Connect the flash light with DC 24v-28v, current≤100mA. When use AC 220V power flash
lights, please match an adapter, and wiring as required
SAFETY BEAM CONNECTION (OPTIONAL)
Important notes:
1. Flash (Caution Light) should be less than 25W.
2. PB (External Push Button) should be ‘N O’.
OTHER TERMINAL INTRODUCTION AND APPLICATION
1. The O/S/C interfaces available.
Add a new O/S/C button to operate the door.
2. Flash light function.
There are corresponding interfaces for this function and provide 24V-35V flash light
voltage. Connect the flash light with DC 24V-28V, current≤100mA. When using AC 220V
power flash lights, please match an adapter and wiring as required.