Page 1
www.safe-t-cover.com 1-800-245-6333
7/8/2020
ASSEMBLY INSTRUCTIONS - PLEASE READ CAREFULLY
Model No.
Inside
Dimensions
Outside
Dimensions
Recommended Concrete
Pad Dimensions
300 Series
22"W x 72"L x 38"H
25 3/4"W x 75 1/8"L x 41 1/4"H
36"W x 86"L x 6" Thick
300D Series
48"W x 78"L x 44"H
51 3/4"W x 81 1/8"L x 47 1/4"H
62"W x 92"L x 6" Thick
300DS Series
48"W x 91"L x 44"H
51 3/4"W x 94 1/8"L x 47 1/4"H
62"W x 105"L x 6" Thick
300T Series
22"W x 72"L x 50"H
25 3/4"W x 75 1/8"L x 53 1/4"H
36"W x 86"L x 6" Thick
300TD Series
48"W x 78"L x 50"H
51 3/4"W x 81 1/8"L x 53 1/4"H
62"W x 92"L x 6" Thick
300TDS Series
48"W x 91"L x 50"H
51 3/4"W x 94 1/8"L x 53 1/4"H
62"W x 105"L x 6" Thick
400 Series
26"W x 86"L x 44"H
29 3/4"W x 89 1/8"L x 47 1/4"H
40"W x 100"L x 6" Thick
400T Series
26"W x 86"L x 54"H
29 3/4"W x 89 1/8"L x 57 1/4"H
40"W x 100"L x 6" Thick
600 Series
36"W x 100"L x 56"H
39 3/4"W x 103 1/8"L x 59 1/4"H
50"W x 114"L x 6" Thick
600T Series
36"W x 100"L x 64"H
39 3/4"W x 103 1/8"L x 67 1/4"H
50"W x 114"L x 6" Thick
600TM Series
36"W x 100"L x 70"H
39 3/4"W x 103 1/8"L x 73 1/4"H
50"W x 114"L x 6" Thick
600TS Series
38"W x 120"L x 64"H
41 3/4"W x 123 1/8"L x 67 1/4"H
52"W x 134"L x 6" Thick
1.
Do not remove the PVC masking film until the enclosure is fully assembled. The PVC masking film
will protect the finish of the metal panels during installation.
2.
The concrete pad should be 6” thick x 14” longer than enclosure ID x 14” wider than enclosure ID.
Please note - the concrete pad should be level or the access panels may be difficult to install.
3.
Mark the concrete pad for the outside of the enclosure using the dimensions in the table above.
4.
Assemble the “B-A-B” (side-end-side) assemblies using hex head screws. (For best results, insert a bead
of silicone caulk into the inside bend of the “A” panel corners.) Position both sets of assembled panels
on the marked concrete base (Fig. 1).
FIG. 1
