INSTRUCTION MANUAL
3
SAFETY
Before installing and using the Active Air Inline Duct Fan, please review this manual,
including the following safety recommendations.
CAUTION: BEFORE CARRYING OUT ANY MAINTENANCE OR SERVICING,
ENSURE THE UNIT IS DISCONNECTED FROM THE MAIN SUPPLY. FOR
GENERAL VENTILATION USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS
OR EXPLOSIVE VAPOURS.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY,
OBSERVE THE FOLLOWING GUIDELINES:
•
Always disconnect this fan from the power supply before installation, cleaning,
servicing, and maintenance.
•
This fan must be grounded in accordance with local regulations.
•
This fan is fitted with an automatic reset type thermal cut out which switches
the fan off in the event of a fault condition. Only a qualified and competent
person may carry out maintenance after the electrical supply has been isolated.
•
Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer or place of purchase.
•
Active Air inline duct fans are designed for use in up to 95% relative humidity.
They are not humidifiers or dehumidifiers. This fan is not suitable for corrosive
or explosive atmospheres.
•
Installation work and electrical wiring must be done by a qualified person(s)
in accordance with all applicable codes and standards, including fire-rated
construction.
•
When cutting or drilling into walls or ceilings, take care not to damage electrical
wiring and other hidden utilities.
•
Ducted fans should always be vented outside the area occupying the garden for
the most efficient operation.
• NEVER
allow the unit to directly contact moisture or wet environments.
•
Take caution when operating.
This unit has an unguarded impeller.
Therefore,
DO NOT
use it in locations readily accessible to people or animals.
