Page 2 of 4
HydroLynx
Systems, Inc.
•
950 Riverside Pkwy #10 • West Sacramento, CA 95605-1501
Phone 916-374-1800 • Fax 916-374-1877 • Email hydro@hydrolynx.com
Ritron radio
1.
Place Ritron radio per photo.
2.
Drill one hole on the mounting bracket of the Ritron radio.
3.
Cable tie to mounting rods.
4.
Put right-angle BNC on the radio
before
installing on the
plate; it is a tight fit.
ALERT2 G2012 Encoder PCB installation
Using #4 hardware provided, install in this order:
1.
Insert screw through mounting plate.
2.
Install nylon standoff and nylon nut then tighten.
3.
Install ALERT2 PCB assembly.
4.
Install four (4) nylon nuts then tighten.
