background image

32 

 

EACH TIME BEFORE FILLING THE SPA 

1 Check to be sure that the shut off valve is closed (turn 

handle clockwise until it stops) 

2 Safety cap is securely in place. 
3 If the drain valve is facing a wall, leave enough space 

between the valve and wall (6” minimum) in order to 
have enough space to connect a garden hose. 

 

TO DRAIN THE SPA 
1 Turn Power Off 

Turn the power off at the spa consoles and deactivate 
disconnect switches at the GFCI plug or load center. 

2 Locate Spa Drain Valve 

The spa drain valve is located on the right side of the 
cabinet. 

3 Remove Drain Valve Safety Cap 

Remove the safety drain cap and store for use when 
refilling your spa. Attach a standard garden hose to the 
drain valve. 

4 Attach Hose & Drain 

With the garden hose attached rotate the end of the drain 
counterclockwise until it stops turning. Pull the drain to-
wards you and it will begin to drain. To stop draining the 
tub simply reverse the process by pushing the drain in 
and rotating it clockwise until it will not turn anymore. 
Make sure you do not force the drain in so that it is prop-
erly aligned.

 

CLEANING THE ACRYLIC SURFACE 

The acrylic surface can be cleaned and polished using a soft 
cloth and acrylic cleaner, available at your Hydropool Retailer. 

• 

Important: Do not use detergents - the re-

maining residues will adversely affect water 
chemistry, making it difficult to maintain 
proper water balance 
• Do Not use abrasive cleaners - damage to 
the acrylic surface will occur. 

 

SAFETY HARD COVER 

When a hot tub is uncovered, over 90% of heat is lost from the 
water surface. This evaporation also affects the chemical bal-
ance and could create humidity problems indoors. HYDRO-
POOL Safety Hard Covers are engineered for maximum ther-
mal efficiency and appearance. They are hinged in the middle 
for easier handling, and the zip fastener allows the tapered 
foam inserts to be changed if damaged. The skirt of the safety 
hard cover overlaps the lip of the hot tub for a finished fit. The 
handles are placed so that even one person can easily carry a 
large cover. The locks, with one part fastened to the deck or 
skirt, prevent small children or animals from entering the hot 
tub. Do not drag the safety hard cover across the hot tub or 
decking. Fold the cover first, then lift by the handles. Standing 
on the hardcover could cause the tapered foam inserts to 
crack, which will lead to water absorption. 
 

NEVER LEAN OR STAND ON YOUR HARDCOVER. 

The cover should be cleaned at least twice a year with a vinyl 
moisturizer and protector.

 

 

Summary of Contents for Serenity Hot Tubs




































Reviews: