HYDROSCAND MaxiCut 5-60, User Manual

teCHnICAL DAtA

Hose dimension 1-2-4-layers ...........................

3/16 - 2”

Max outside hose diameter .................................80 mm
Motor ...............................................................5,5 kW

Voltage

 ......................................

230/400 V/16 A/50 Hz

velocity ........................................................

2850 rpm

Diameter (blade) external

 .................................400 mm

Diameter (blade) internal

 ...................................50 mm

Air pressure

 ...................................................... 6,0 bar

Counter....................................................

0 - 9999 pcs

Smoke evacuation system

 .................................100 mm

Noise Level Idle speed

 ..................................... 66,5dBA

Noise Level Cutting

 ........................................ 85,3 dBA

Colour .....................................................

Black/Orange

DIMensIons

Length/Depth/Height

 ...................... 700x600x1300 mm

Weight

 ..............................................................

140 kg

DesIGnAtIon:

PARt nUMBeR:

MaxiCut 5-60 400V 3-phase

 .............. 9009-00-00-2003S

MaxiCut 5-60 230V 3-phase

 .............. 9009-00-01-2003S

sPARe PARts:

PARt nUMBeR:

Cutting blade HSM 400x4x50 Smooth

 ........... 9009-01-04

Cutting blade HSM 400x4x50 Toothed

 .......... 9009-01-05

10 technical data

10.1 noise Level

Test result of measuring noise level on MaxiCut 5-60 OT. This result is to be consi-
dered as a guiding reference value and it is not performed under any ISO standard 
regulations or similar. The test is made at two different steps, fi rst at idle speed 
and second when cutting a ½” 2-layered hydraulic hose.
The measuring device was placed 1700mm above fl oor level and about 700mm in 
front of machine centre, pointing down at approximately 45 degrees. 

Result:

Idle speed : 66,5 dBA
Cutting : 85,3 dBA