MaxiCut 5-60 USER MANUAL EDITION 2-05 2012-10-23
8
5. Control panels
1. emergency stop button
2. start and stop
3. Hold for counter
Keep the button pressed down as long as you do not wish to count the cuttings.
E.g when clean cutting, press the button and keep it pressed down during the
whole cutting process.
4. Digital counter with reset
The counter is being reset by pressing the button to the left on the counter.
5. switch for cutting speed
This switch is intended for regulation of cutting speed, e.g. when cutting a 1
1/4”-2” dimensioned hose, the speed shall be reduced to no. 1 speed.
6. Cutting stroke adjustment knob
With this knob it’s possible to adjust the cutting stroke, from starting position
with full speed to a variable distance to the point where you want the set cutting
speed (point 5) to begin. The intention with this function is to save time when
cutting hoses with small OD.
7. Regulator and gauge for air pressure
Default working pressure 6 bar.
1
3
5
4
2
7
7
6
Summary of Contents for MaxiCut 5-60
