background image

Page 8

PowerCut 5-85OT USER MANUAL EDITION II 2017-09-08

1. Foot pedal

2. Waste box

3. Adjustable feet

4. Motor

5. Bend support

6. the Hold counter button

7. the emergency stop push button

8. the on/off button

9. Counter with reset button

10. Hose bending system on/off

hose bending system on/off. On when cutting 1 ½” and above, multispiral hoses. On when 
cutting 2” and above, braided hoses.

11. Cuttin stroke switch

A three ways switch. Preset return levels for the bending unit. The cylinder is stopped at 

specified levels to prevent it from doing full return strokes when not necessary.

12. The Front hatch

The front hatch is operated by a pneumatic cylinder located at the top of the machine. The 
hatch has a two way switch (Auto and Down). When “down” is chosen the hatch stays down 
at the whole cutting process. When “auto” is set the hatch is normally open but will auto-
matically go down when the foot pedal is pressed to start the cut. The hatch will come 
down as a protection before the hose will be pressed down and cut. The hatch will automa-
tically open after the cut is made.

13. Cutting speed

Adjust according to hose diameter, reinforcement, material etc.

14. Lifting hole

Summary of Contents for PowerCut 5-85ot
































Reviews: