hygena 203/9309, Assembly Instructions Manual

Assembly Instructions

12

Step

14

This shows the door being fitted to hinge 

plates on the right side.

You may have fitted them to the left side.

5

N b

N b

N a

a:

b:

c:

d:

K

L

B

L

K

L

K

A

L

K

L

K

B

Fit door and handle

Note:

 The easiest way to 

attach the door       is to 

fit the top hinge first, 

then align and fit the 

other hinge. 

a:

Push the hinge     

onto the front part of the 

hinge plate     .

The recess at the bottom 

of screw B goes into the 

slot in the hinge plate.   

b:

Keep the hinge   

FLAT against the hinge 

plate      as you slide it 

across as far as it will go.

Tighten screw A.

c:

The hinge      must be 

flat against the hinge 

plate      prior to any

adjustment.

d:

The hinge      must 

NOT be AT AN ANGLE 

to the hinge plate      

when assembled.

This would indicate that 

the recess at the bottom 

of screw B had not 

located in the slot in the 

hinge plate and the hinge 

would not be secure.

Remove the hinge from 

the hinge plate and then 

re-assemble being 

careful to follow

instructions a-c.

e:

Attach the handle        

to the door       using 

screws         .

L

L

L

K

K

K

L

K

6

e:

5

5

N a

N b