hygena 203/9309, Assembly Instructions Manual

I

I

564mm

8

Step

9

18mm

37mm

564mm

18mm

Outline of 

the unit

Warning:

 The 

unit is heavy. 

Lift with care.

Fit the unit to the wall

If you are joining this unit 

to another one, also refer 

to step 10.

To fix the unit to the wall, 

place the unit in the 

required position and 

lightly mark the outline of 

the top corners of the 

unit with a pencil. 

Fit the 2 wall brackets   

to the dimensions shown 

in the top diagram.

The screws and plugs 

are not supplied as they 

need to be the correct 

type to suit your wall.

Place your unit onto the 

wall brackets     , via the 

hanging brackets      

which you have fitted to 

the sides       of the unit.

Use the screw at the top 

of the wall brackets      to 

adjust the height of the 

unit.

Finally, pull the unit up 

against the wall by 

tightening up the bottom 

screw in the hanging 

brackets     . 

Warning:

 Take 

care when 

drilling the wall 

that you do not drill into 

any pipes, wires etc. If in 

doubt, consult an expert.

I

I

J

1

Assembly Instructions

1

1

I

I

464mm

18mm

37mm

464mm

18mm

Outline of 

the unit

Warning:

 The 

unit is heavy. 

Lift with care.

1

1

J

J

I

J

To adjust the 

height of the 

unit on the wall, 

turn the  top 

screw

Pull the unit up against 

the wall by tightening 

the bottom screw

I

I

I

I