background image

Width - 45cm

Depth - 53cm

Height - 83cm

Important

– Please read these instructions fully before starting assembly

 Customer Helpline: 0345 640 0800

Dimensions

Issue 1 - 10/03/14

Hygena Chair

If you need help or have damaged or missing parts, call the

7

c:

d:

c:

   

  After the sitting test, 

re - tighten bolts again,

if any adjustment needed.

 

d:

    

 It is highly recommend 

to re - tighten all the bolts

again after using the chair

for 7 days.

 

Note :

 

Please keep the 

allen key to re - tighten

all bolts again when 

required.

Assembly Instructions

If you need help or have damaged or missing parts, call the

 Customer Helpline: 0345 640 0800

Assembly is complete.

Assembly Instructions - Please keep for futrue reference.

 

   

 

249/8940

Summary of Contents for 249/8940

Page 1: ...c d c After the sitting test re tighten bolts again if any adjustment needed d It is highly recommend to re tighten all the bolts again after using the chair for 7 days Note Please keep the allen key to re tighten all bolts again when required Assembly Instructions If you need help or have damaged or missing parts call the Customer Helpline 0345 640 0800 Assembly is complete Assembly Instructions ...

Page 2: ...aging carefully and responsibly Only clean using a damp cloth and mild detergent do no use bleach or abrasive cleaners From time to time check that there are no loose screws on this unit This product should not be discarded with household waste Take to your local authority waste disposal centre Maximum safe weight of user 110 Kgs Step 2 e Assembly Instructions Attach lock bracket by using screw as...

Page 3: ... Right side rail Left side rail 5 c Assembly Instructions d d c Place the chair on the floor Insert bolts with spring washers and washers through side rails holes into front leg frame screw all bolts by using allenkey 3 A F B C Place the seat pad on the table Put the chair frame on top of the seat back 2 A B C 2 3 BACK 1 4 4 BACK BACK Note The quantities below are the correct amount to complete th...

Page 4: ... A E Screw x 4 b Attach left and right side rails onto the chair back with bolt spring washers and washers by using allenkey as shown in the figure B C F Do not fully tighten Fit the front leg frame onto the side rails 3 4 3 1 a b 4 pre drilled hole Right side rail Left side rail A B C 4 BACK 4 4 1 Tools required Phillips screwdriver medium large Ruler Use this ruler to help correctly identify the...

Reviews: