background image

Safety and Care Advice

Check you have all the
components and tools listed on

pages 2, 3 and 4.
Remove all fittings from the

plastic bags and separate them
into their groups.
Keep children and animals

away from the work area, small

parts could choke if swallowed.
Make sure you have enough

space to layout the parts before

starting.

Assemble the item as close
to its final position (in the same

room) as possible.

Assemble on a soft level

surface to avoid damaging the

unit or your floor.

Assembly requires 2 people.

Do not fully tighten bolts until the

whole bed is assembled.  Do not

overtihgten the nuts to avoid

causing damage to the threads.

We do not

                       recommend the
                       use of power
                       drill/drivers

 for

                       inserting screws,

as this could damage the unit.
Only use hand screwdrivers and

Allen keys.

Dispose of all packaging

carefully and responsibly.

Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

From time to time check that

there are no loose screws on
this unit.

This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

1

Important Ottoman Safety Warnings

·  Caution.This bed uses a pressurised mechanism.
·  Use caution when operating - Always use two hands at arm’s length, and only where

   illustrated on the product.

·  You must ensure the mattress is on the bed frame before lifting the mechanism - Failure

   to do  so may result in injury.

·  Please ensure Children and pets are kept away from the bed when operating the bed

   mechanism.

·  If removing the mattress, make sure that the frame is secured as it could flip open.
·  Only use the storage compartment when the frame is fully raised in the ‘up’ position.
·  No children or animals are left unattended when the frame is in the ‘up’ position.
·  Do not remain on the bed whilst the lifting mechanism is in use.
·  Beware of Entrapment - Keep both hands clear of mechanism when operating the

   mechanism.

·  When lifting the bed remove all bedding - Except the fitted sheet.

v.jpg

X.jpg

Summary of Contents for 381/4561

















Reviews: