5
Assembly Instructions
Step 6
Connect top base
7
and top shelf
9
to top
right side
2
.
Tighten female camlocks
in under side of top base
7
with a screwdriver.
Step 7
Connect top left side
1
to exposed ends of top
base
7
and top shelf
9
as shown
Tighten female camlocks
in under side of top base
7
with a screwdriver.
Step 8
Screw 4 x male camlock
A
into the under side of
top
10
as shown.
Step 9
Connect top
10
as
shown.
Tighten female camlocks
with a screwdriver.
Assembly Instructions
Step 6
Connect top
1
to
assembly completed
at Step 5 as shown
and tighten the female
camlocks inside the unit
with a screwdriver.
Step 7
Slide back panel
6
into
the slots of left and right
sides and push firmly
down to locate.
Note:
the holes in the
back panel should point
downwards at this stage
and should line up with
the holes in support rail
5
when back panel is
fully inserted.
Step 8
Connect base
2
to
the assembly as shown
and tighten the female
camlocks inside the unit
with a screwdriver.
Turn the unit right way
up to complete the
remaining steps.
1
6
5
2
