hygena AE6BSMP, Operating Instructions Manual

Figure 2

BLUE

BROWN

GREEN

Wiring and safety of the oven

In case of any damage to the 

feeder cable, please call the Authorised 
Service agent. The cable 

be replaced by 

the Authorised Service agent.

The instructions given below 

must 

be followed 

without fail during wiring :

IMPORTANT

 - 

The earthing cable must be 

connected via  the screw with the earthing 
mark. Supply cable connection 

must 

 be as 

shown in Figure 2. If there is no earthed outlet 
conforming to regulations in the installation 
environment, call the Authorised Service 
immediately.

IMPORTANT

 - 

The earthed outlet 

must 

 be in 

close vicinity of the appliance. 

Never

 use an 

extension cord.

IMPORTANT

 - 

The supply cable 

should not

contact the products hot surface.

IMPORTANT

 - 

must 

IMPORTANT

 - 

Wiring of the appliance 

must 

be performed by the Authorized Service agent. 
H05VV-F type supply cable 

must 

be used.

IMPORTANT

 - 

Faulty wiring may damage the 

appliance. Such damage will not be covered 
under the warranty.

IMPORTANT

 - 

The appliance is designed to 

connect to 220-240V~ electricty supply if your 
household supply is different than the value 
given above, call the  Authorized Service 
immediately.

IMPORTANT

 - 

The Manufacturer declares that 

it bears no responsibility whatsover for any 
kind of damage and loss arising from not 
complying with these safety instructions. 

7

Installation 

Customer Helpline 

0845 600 4632

Electrical connection