background image

Electrical Safety Instruction

WARNING!

THIS APPLIANCE MUST BE EARTHED

IF THE MAINS LEAD OF THE APPLIANCE IS FITTED

WITH A PLUG:

Fuse replacement

   If the mains lead of this appliance is fitted with a BS

   1363A 13 amp fused plug, to change a fuse in this type of

   plug use an A.S.T.A. Approved fuse to BS 1362 Type and

   proceed as follows:

1. Remove the fuse cover (A)

2. Remove the fuse(B)

3. Fit replacement fuse into plug

4. Refit the fuse cover

IMPORTANT

The fuse cover must be refitted when changing a fuse and if

the fuse cover is lost the plug must not be used until a correct

replacement are identified by the colour insert or the colour

embossed in words on the base of the plug. Replacement fuse

covers are available from your local electrical store.

CONNECTION TO A REWIREALE PLUG

If the fitted plug is not suitable for your socket outlet, then it should

be cut off and disposed of order to avoid a possible shock hazard

should it be inserted into a 18A socket elsewhere. A suitable alter-

native plug should then be fitted to the cable.

The wires in this mains lead are coloured in accordance with the

following code:

BLUE                               "NEUTRAL"   (N)

BROWN                           "LIVE"            (L)

YELLOW & GREEN        "EARTH"        (E)

1.The YELLOW & GREEN wire must be connected to the terminal

   in the plug, which is marked with the letter "E"

   or by the Earth symbol  

   or coloured green or green and yellow.

2.The BLUE wire must be connected to the terminal which is marked

   with the letter "N" or coloured black.

3.The BROWN wire must be connected to the terminal which is

   marked with the letter "L" or coloured red.

.12.

Procedure when Reporting A Fault

1. Give full name, address including post code, home telephone number and

    business telephone number if appropriate.

2. Quote sales receipt number, make and model of faulty appliance. This

    product's reference is as follows: (AHY8122).

3. Give a summary of the problem.

            GUARANTEE CONDITIONS

a) Any claim during the period of the guarantee MUST BE ACCOM

    PANIED WITH THE RECEIPT relating to the original purchase.

b) The unit must be correctly installed and operated in accordance

    with the manufacturer's instructions and used for normal domes-

    tic purposes.

c) The guarantee does not cover accidental damage, misuse or

    alterations which are likely to affect the units.

d) The guarantee is invalid is tampered with, or repaired by any

    unauthorised person.

e) The guarantee in no way affects your statutory.

f) Mainland U.K. only.

1 5 0 2 4 4 0

0 8 7 0

Summary of Contents for AHY8122









Reviews: