Page 28
7.3 Programming steps for the control valve
Please note:
Should the control valve refrain from reacting to
inputs of any kind, the valve lock may be active.
7.3.1 Deactivating and re-activation of the valve lock
In order to prevent any unintended setting of the control valve
parameters, a valve lock can be engaged.
Disengage valve lock
»
Sequentially press
∇
, NEXT,
Δ
and SET CLOCK keys.
Display will show „DISPLAY UNLOC“
Engage valve lock
»
For re-engaging the valve lock, exactly repeat the step
described above. Display will show „DISPLAY LOC“.
7.4 Settings
Step 1: Set time of the day
»
Press the
SET CLOCK
key ( „SET TIME“ is displayed
and the hour field is blinked)
»
Change the setting using the
Δ
and
∇
arrow keys
»
Press the
NEXT
key for storage und to advance to the
minutes setting (the minutes field is blinked)
»
Change the setting using the
Δ
and
∇
arrow keys
»
Press the
SET CLOCK key
again for storage and exi-
ting time of the day setting; the display returns to
„TIME“
Step 2: View current water flow
»
Starting fro „TIME“ display press the
NEXT
key; the cur-
rent water flow l/min is displayed
»
Press the
NEXT
key for the next step or
REGEN
to
return to the previous display. i.e. time-of-the day
Step 3: View the remaining capacity (available amount of
treated water)
»
When pressing the
NEXT
key to finalize the previous
step the display shows „CAPACITY REMAINING“ and
the amount of softened water in [M³] is displayed
»
Press the
NEXT
key for returning to the time-of-the-day
display or
REGEN
to go back to the previous step
Summary of Contents for WaterLine Double
Page 43: ...Page 43 This page intentionally left blank ...
Page 44: ......
