Ref: HY.007b-version3
-
10/6/2020 ©Analis/Hymetec
p
. 12/20
4
Put the nozzle back into its cradle and press firmly until it clicks into position.
Figure 12
4.2
Disinfection procedure
1
Connect the power cord to the connector on the back of the Hyspray (A) and insert the
plug into a wall outlet.
Figure 13
!
Check that the voltage indicated on the identification plate
corresponds to
the local mains voltage before you connect the unit!
2
Check that there is sufficient product in the HyPro Technical 7% bottle to complete the
entire disinfection process for the selected room volume!
3
Set the ON/OFF switch (B) to the ON position.
4
Place the Hyspray in a corner of the room to be disinfected, the nozzle pointing at the
middle of the room.
5
Press the Start/Stop key on the operating panel.
Figure 14
The display shows the default value for a room volume of 50 m³.
A
B
50