29
0.6~0.7 mm
(0.024~0.028 in)
●
Do not over torque or cross thread the
spark plug or the aluminum threads of
the cylinder head will be damaged.
Do not allow contaminants to enter the
engine through the spark plug holes
when the plug is removed.
●
The standard spark plug for this motor-
cycle has been carefully selected to
meet the vast majority of all operational
ranges. If the spark plug color indicates
that other than a standard spark plug be
used, it is best to consult your Hyosung
dealer before selecting an alternate
plug or heat range. The selection of an
improper spark plug can lead to severe
engine damage.
CAUTION
SPARK PLUG REPLACEMENT GUIDE
Hotter type
Standard type
Colder type
DR7EA
DR8EA
DR9EA
Readjust the spark plug gap to 0.6~0.7 mm
(0.024~0.028 inch) by using a spark plug gap
thickness gauge.
PARKING BRAKE
is equipped with the
brake lining wear limit indicators on the
parking brakes.
To check wear of the brake lining, perform
the following:
Check if the parking brake system is properly
adjusted.
While fully applying the brake, check to see
that the extension line of the index mark(
)
is within the range(
) on the brake panel.
If the extension line is beyond the range,
have the brake shoe assembly replaced by
your Hyosung dealer to ensure safe opera-
tion.
ProCarManuals.com