MoniMax 5600T 6. Appendix
6 - 34
Error
Code
Cause
Handling
4009F00
3 Cassette miss feed during dispense
operation
1. Check the remaining notes in 3 Cassette
2. Check if the remaining note sensor (CS36) of 3
Cassette is normal.
3. Check a jammed note in 3 Cassette or remount it
4. Remove the dust on the CS31A and CS31B Sensors
5. Replace 3 cassette box when multiple errors occur.
400A100
Detected the CS9 Dark in
Reject(Retract) box during initializing.
1. Open the reject/retract box cover
2. Check if the CS9 sensor cable is disconnected.
3. Exchange a sensor after abnormal operating the CS9
sensor
400A200
When a note doesn’t arrive from the
tray to the throat entrance
(CS10AB~CS14 (Delivery Jam).
1. Remove a jammed note or foreign objects between
the throat and the tray
2. Check if the CS10AB and CS14 sensor cable is
disconnected.
3. Check the feed motor operation in the throat unit.
4. Exchange a sensor after abnormal operating the
CS14 sensor .
400A700
When cam doesn’t arrive at dispense
position within regulated time (cam
error)
400A800
When cam doesn’t arrive at delivery
position within regulated time (cam
error)
400AA00
Failed during writing EEPROM data
1. Retry after initialization.
2. Replace the CDU Board.
400AB00
Disable to drive due to the remaining
notes in the tray during initializing or
dispense reserved operation.(CS10A
and CS10B Dark detection)
1. Remove the remaining notes or foreign objects in the
tray.
2. Check if holders on the CS10A and CS10B sensors
are bended.
3. If error occurs when checking CS10A/CS10B (CDU
B/D CN2 #17~24) disconnection and operation, replace
a sensor.
400AD00
Disable to detect notes in CS15
sensor during delivery operation
1. Remove the remaining notes on the throat.
2. If error occurs when checking CS15 disconnection
and operation, replace a sensor.
400AE00
No note in the tray before delivery or
retract operation.
1. If error occurs when checking CS (CDU B/D CN2
#17~24) disconnection and operation, replace a sensor.
2. Check the tray deliver position operation.
Summary of Contents for MoniMax 5600T
