15
15
�
Turn on the turn signal lamp and
return the throttle grip.
HOW TO STOP AND PARK
P
U
S
H
I G
N
IT
IO
N
�
When completely stopped, turn off the
turn signal lamp. Set the key
(
OFF
)
position.
�
Put the motorcycle on the center stand.
�
Lock the steering for security.
�
Pull the ignition key out of the lock and
keep it yourself.
During mamufacture only the best possible materials
are used and all machined parts are finished to a
very high standard but it is still necessary to allow
the moving parts to
“
BREAK-IN
”
before subjecting
the engine to maximum stresses. The future
performance and reliability of the engine depends
on the care and restraint exercised during its early
life. The general rules are as follow:
●
Keep to these breaking-in speed limit:
Up to 1,000km(600miles):Less than 1/2
throttle
●
Upon reaching an odometer reading of
1,000km(600miles) you can subject the motorcycle
to full throttle operation.
●
Do not maintain constant engine speed for an
extended time period during any portion of the
break-in.
Try to vary the throttle position.
BREAKING-IN
Don
’
t park the motorcycle on the slippery or
tilted surface.
CAUTION
