20
BRAKE FLUID
●
Keep the motorcycle upright and place the
handle straight.
●
Check the brake fluid level by observing the
middle line.
●
When the level is below the lower the middle
line, check if there is leakage.
BRAKE PADS
●
Wearing condition of brake pads can be
checked by observing the wear limit line on the
pads. When the wear exceeds the limit line,
replace the pads.
●
How to replenish with brake fluid
1. Clean the brake fluid reservoir around not to
allow dusts to get inside of it.
2. Loosen the screw and open the cap.
3. Replenish with brake fluid to the limit line.
the recommended brake fluid:DOT4
4. Fasten the cap.
MIDDLE LINE
WEAR LIMIT LINE
DISC
●
Check the front/rear brake while running in low
speeds.
●
Check if there is leakage or damage on the
brake fluid reservoir and the connected parts are
loose.
●
Check if the vibration damages the brake hose
while moving the handle left/right or running.
15-25mm
5-20mm
BRAKE HOSE
BRAKE
CALIPER
