12
ENGINE COOLANT SOLUTION
Use an engine coolant that is compatible
with aluminum radiator, mixed with distilled
water only at a 50 : 50 mixture ratio for
engine coolant solution.
An engine coolant mixture other than 50 :
50 can affect cooling efficiency or rust
inhibiting performance.
◉
◉
WATER FOR MIXING
Use distilled water only.
Water other than distilled water can
corrode and clog the aluminum radiator.
◉
◉
ENGINE COOLANT
The engine coolant performs as rust
inhibitor and water pump lubricant as well
as anti-freeze. Therefore the engine
coolant should be used at all times even
though the atmospheric temperature in
your area does not go down to freezing
point.
50%
Water
Engine coolant
0.7
ℓ
0.7
ℓ
Required amount of water / coolant
Solution capacity (total)
1.4
ℓ
◉
◉
COOLANT RESERVOIR TANK
☞
Refer to 72 page.
Engine coolant is harmful or fatal if
swallowed or inhaled.
Do not drink anti-freeze or coolant
solution. If swallowed, do induce
vomiting. Immediately contact a
poison control center or a physician.
Avoid inhaling mist or hot vapors ; if
inhaled, remove to fresh air. If coolant
gets in eyes, flush eyes with water and
seek medical attention. Wash
thoroughly after handling. Solution
can be poisonous to animals.
Keep out of the reach of children and
animals.
WARNING
Spilled engine coolant can damage
painted surfaces.
Do not spill any fluid when filling the
radiator. Wipe spilled engine coolant
up immediately.
CAUTION
N O T E
This 50% mixture will protect the
cooling system from freezing at
temperatures above -31
℃
℃
.
If the vehicle is to be exposed to
temperature below -31
℃
℃
, this mixing
ratio should be increased up to 55%
(-40
℃
℃
) or 60% (-55
℃
℃
). The mixing
ratio should not exceed 60%.
Summary of Contents for TE450 -
