Powermax125
Service Manual 808070
19
Section 1
Specifications
Safety information
Before operating any Hypertherm equipment, read the separate
Safety and Compliance Manual
(80669C) included with
your product for important safety information.
Powermax125 System description
The Powermax125 is a highly portable, 125 A, handheld and mechanized plasma cutting system appropriate for a wide
range of applications. The Powermax system uses air or nitrogen to cut electrically conductive metals, such as mild steel,
stainless steel, or aluminum. Smart Sense™ technology automatically adjusts the gas pressure according to cutting mode
and torch lead length for optimum cutting.
The Powermax125 is recommended for metal thicknesses up to 44 mm (1-3/4 inches), can sever up to 57 mm
(2-1/4 inches), and can pierce thicknesses up to 25 mm (1 inch). FastConnect™ provides a simple push-button torch
connection to the power supply for quick torch changes.
The typical handheld Powermax125 system includes a Duramax™ Hyamp 85° hand torch with a starter consumable kit, a
box of spare electrodes and nozzles, and a work lead cable. Reference materials include: operator manual, quick setup
card, registration card, setup DVD, and safety manual.
The typical mechanized Powermax125 system includes a Duramax Hyamp 180° full-length machine torch with a starter
consumable kit, a box of spare electrodes and nozzles, work lead cable, and remote-start pendant. Reference materials
include: operator manual, quick setup card, registration card, setup DVD, and safety manual.
See your Hypertherm distributor for other system configurations. You can order additional styles of torches, consumables,
and accessories, such as the plasma cutting guide. See
on page 293 for a list of spare and optional parts.
Powermax125 CSA and CE power supplies ship without a plug on the power cord. See
CCC certified configurations do not ship with a power cord.
