7
RIOT CONTROL USER MANUAL
4-IN-1 ESC
You can also use a 4-in-1 ESC Board with the Riot Control FC. In
this case, use the break out connector located on the underside of
the board.
WARNING:
You must ensure the connector is pinned properly for
your flight board and 4-in-1 board
.
Currently there is no standard wiring order, so the order of the
pins and wires may vary between the Riot Control FC and the 4-in-1
ESC board of your choice.
Looking at the underside of the board, the order of the pins on
the Riot Control FC Breakout Port is as follows:
PIN
Function
1
GND
2
BAT + input
3
Current Sensor
4
GND
5
Motor 1 output
6
Motor 2 output
7
Motor 3 output
8
Motor 4 output
Summary of Contents for Riot Control
Page 1: ...Riot Control F L I G H T C O N T R O L L E R USER MANUAL...
Page 4: ...4 RIOT CONTROL USER MANUAL BOARD LAYOUT...
Page 11: ...11 RIOT CONTROL USER MANUAL FrSky R XSR Wiring Enable Inversion for FrSky...
Page 13: ...13 RIOT CONTROL USER MANUAL SPM 4649T Wiring Disable Inversion for Spektrum Serial...