© 2022 HyQuest Solutions
62
Configuration
3.4.9
SMS Numbers
In order to prevent unwanted access to the iRIS, only SMS commands comming from a number listed in these fields will be
processed.
3.5
SDI-12 Command Mode
An extension to the real time diagnostic function (as described in section
) the iRIS is capable of
sending user commands across the SDI-12 bus and displaying the results. It also has a handy address change function and
SDI-12 address scan function.
For more information, see the following subsections:
§
§
Sending user command to device
§
§
3.5.1
Accessing
The command mode is accessible via the SDI-12 Command option in the advanced ribbon of iLink. When entering the SDI-
12 command mode the user is prompted that the action will disable normal SDI-12 communications:
121
62
63
63
64
