7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
57
MX4514 Rev. A ©2019
www.hysecurity.com • 800-321-9947
FUNCTION
11. Gate Sync
Default
Off
ON
OFF
10. Defaults (see above)
12. ESC
Main Display
OK
OK
OK
FUNCTION
10. Default
Default
System
Y
Default
Radio Ch
Y
Default
Events
Y
Default
Charger
Y
YES
YES
YES
YES
NO
NO
NO
NO
System Set
to Defaults
Radio Chan. Set
to Defaults
Events Set to
Defaults
Charger Set to
Defaults
11. Gate Sync
(see next page)
9. Adv. Settings (see previous page)
OK
OK
OK
OK
OK
FUNCTION>DEFAULT MENU:
Returns some or all settings of the gate
operator to the original factory settings:
•
System Settings (requires that
system be “re-learned”)
•
Radio Channel Settings
•
Event Settings
•
Charger Settings
GATE SYNC MENU:
In a dual gate system, the actuator nearest the
control box (connected to Motor 1 inputs) has a
substantially shorter cable than that connected to
Motor 2 inputs. This may introduce a noticeable
voltage drop and reduction in speed of Motor 2
actuator compared to the Motor 1 actuator. When
this setting is ON, the control board attempts to
synchronize the run time of both actuators.
FUNCTION BUTTON / Defaults
FUNCTION BUTTON / Gate Sync
