HySecurity SlideDriver 50VF2 Installation And Reference Manual Download

Page: 16 / 86

Features

High Speed, Very Heavy: SlideDriver 50VF2, 50VF2-EFO, and 50VF3

UL class III & IV.

These operators are designed for very heavy, up to 5,000 lbs gates moving at high and very high speeds.
The variable frequency drive moves very heavy gates at the following speeds:

26 inches per second, 50VF2
26 inches per second, 50VF2 – EFO (36in/s Emergency Fast Operate to close on a constant HOLD command.)
36 inches per second, 50VF3

SlideDriver VF models close gates to a very precise point and are extremely easy on gate hardware. SlideDriver
VF operators use a variable frequency drive, larger wheels and a higher flow rate pump to reach 2 to 3 inches
per second.  These operators use the same powerful HySecurity Smart Touch controller and simple and reliable
hydraulics of all SlideDriver models.

The Smart Touch Controller

This is the brain of HySecurity operators. Groundbreaking technology combined with sturdy construction to
reliably serve in the harshest environments. The Smart Touch Controller can quickly be configured by an
installer or user to adapt to nearly any site specific functional requirement. All system settings are performed
with the use of four programming buttons and an LCD display. The Smart Touch Controller has no switches to
set. An RS232 port for external communication is standard. An EEPROM records date stamped system events.
A log of events can be downloaded from the RS232 port to a laptop computer to evaluate abnormal gate system
operation. HySecurity HY-5A vehicle detectors set a new industry standard by communicating valuable
performance data to the Smart Touch controller, allowing quick and deep, user-friendly diagnostics.

SlideDriver C, Correctional Facility

(-C)

The CF models offer an extra heavy 10-gauge cover with three different locking options. Correctional
Facility operators are shipped ready to interface to the many options and interlocks commonly used at
correctional facilities, such as gate position outputs, interlock capability for sally ports and an interface
relay to control an external solenoid lock.

SlideDriver M, Modular

(-M)

This family of operators is a two part modular version of the standard SlideDriver operator. The motor,
hydraulic pump and electric controls are located in a separate enclosure, often at a distance from the
drive unit. This version allows for a more flexible placement of the operator, which may be required or
desirable in some situations involving unique mounting, special security (including blast mitigation) or
those areas requiring a very quiet operator.

Stopping the Gate

All models employ a time delay

soft stop

system. Additionally, brake valves are used to control the

stopping of heavy or fast moving gates. These valves are exclusive to HySecurity operators. They are
independently adjustable to allow the gate to stop predictably and without banging.

Starting the Gate

The variable speed drive provides a

soft start

which accommodates for the load and starts the gate

smoothly, similar to letting your foot slowly off a car clutch without any lurching.

WARNING:

DO NOT attempt to connect to 110/120V power. The variable frequency (VF) drive

SlideDriver 50VF2, 50VF2-EFO, and 50VF3 operators can only be connected to 208V, 230V single- and
three-phase power supplies or 460V three-phase power supplies. Refer to the

Wire Chart

on page 59 for

proper wire sizing and the distances they accommodate. See further WARNINGS on page 60.