HySecurity UL 325-2016, Quick Start - Supplemental Instructions

H

OW

 S

OFTWARE

 H

ANDLES

 M

ONITORED

 E

NTRAPMENT

Since HySecurity gate operators use software to control gate movement, contacts, and accessories, the changeover to 

monitored sensors is simple. In fact, the ability to monitor sensors has always been an available Installer Menu item. (Refer 

TOŸ4ABLEŸŸ3ETTINGŸTHEŸ3ENSORŸ,OGICŸONŸPAGEŸ Ÿ)NSTEADŸOFŸANŸOPTIONŸITŸNOWŸBECOMESŸTHEŸDEFAULTŸSTANDARD

•  Build Year is a new Installer Menu item in Smart DC and Smart Touch Controllers versions h5.50 and h4.50 (and 

higher).

• 

.EWŸLABELSŸSHOWŸWHEREŸ%DGEŸ0HOTOŸ%YEŸ/PENŸANDŸ0HOTOŸ%YEŸ#LOSEDŸHAVEŸCHANGEDŸTOŸ3%.3/2ŸINPUTSŸ9OUŸ

can program the type of sensor wired to one of those inputs. See illustrations on page 6 and Table 4 below.

•  Installer Menu items, PC and GC (Photo eye output and edge sensor output) which used to default to Normally 

Open (NO) have been converted to Normally Closed (NC) contacts so the software can detect the presence and 

proper operation of entrapment protection sensors. 

Table 4: Changes to Sensor Inputs on the Controller

Location of Sensor Inputs on Controller

Installer Menu Item Codes

Smart Touch Controller (STC): Hydraulic gate operators

Smart Touch Display:

Input #

Current Silk Screen Label

2016 Silk Screen 

Label

OLED - two line,  

32 character

LCD - 7  

segment text

13

EDGE SENSOR

SENSOR 1

S1  SENSOR 1

6

17

PHOTO EYE OPEN DIRECTION

SENSOR 2

S2  SENSOR 2

6

19

PHOTO EYE CLOSE DIRECTION SENSOR 3

S3  SENSOR 3

6

Smart DC Controller (SDC):  

Electromechanical gate operators

Smart DC Display:  

32 character LCD

No numerical input 

number appears on 

Smart DC

EYE OPEN

SENSOR 2

S2  SENSOR 2

EYE CLOSE

SENSOR 3

S3  SENSOR 3

EDGE

SENSOR 1

S1 SENSOR 1

NOTE:

4HREEINPUTSFOREXTERNALENTRAPMENTPROTECTIONSENSORSAREAVAILABLEONTHE(Y3ECURITYGATEOPERATORCONTROLLER.EWSILK

screen controller boards are on order, but until they are ready for shipment, labels will be overlaid on the board to indicate 
terminology adaptations.

4ABLEŸŸINDICATESŸHOWŸTHEŸEDGEŸANDŸPHOTOŸEYEŸINPUTSŸHAVEŸBEENŸRENAMEDŸTOŸGENERICŸSENSORŸINPUTSŸ4HEYŸAREŸ

INTERCHANGEABLEŸANDŸCONÚGURABLEŸ4HEŸSOFTWAREŸMUSTŸKNOWŸWHATŸTYPEŸOFŸSENSORŸISŸWIREDŸTOŸ3%.3/2ŸŸŸANDŸŸ

BEFORE

 it 

will allow gate travel. Refer to page 9. 

www.hysecurity.com  

©

 2016 

Quick Start 

D0726 Rev. C 

 7