Battery Maintenance
2240 SRM 1
NOTE:
INDICATOR INSERT (2). GREEN - FOR BATTERY WITH CELL CAPS. GRAY - FOR BATTERY WITH
SEALED CELLS.
NOTE:
CONNECTOR BODY COLOR [ANDERSON SBE CONNECTOR ONLY (1)]. GRAY - 36-VOLT BATTERY.
BLUE - 48-VOLT BATTERY. GREEN - 72-VOLT BATTERY. BLACK - 80-VOLT BATTERY.
A.
ANDERSON SBE OR SBX CONNECTOR
B.
FEM OR DIN CONNECTOR
1.
HALF OF CONNECTOR SET
2.
RED HOUSING FOR +12 VOLT "BATTERY TAP"
3.
LOCK SPRING (TIP OF CONTACT MUST LOCK
OVER TOP OF LOCK SPRING)
4.
BLACK CONNECTOR HOUSING (ASSEMBLED
ON RED HOUSING WITH SLOTS FOR LOCK
PINS ALIGNED AS SHOWN - NO WIRE OR
CONTACT IN HOUSING)
5.
SLOT FOR LOCK PIN
6.
CONTACT FOR CONNECTOR OF +12 VOLT
BATTERY TAP
7.
KEY [RED (2) AND BLACK (4) CONNECTORS
ALIGN ON KEY]
8.
LOCK PINS FOR +12 VOLT CONNECTOR (MUST
INSTALL FROM FRONT OF CONNECTOR
THROUGH RED AND BLACK CONNECTORS)
9.
+12 VOLT WIRE TO TRUCK (TRUCK HALF) OR
TO BATTERY (BATTERY HALF)
10. INDICATOR INSERT FOR BATTERY VOLTAGE
AND BATTERY TYPE [ROTATE FOR CORRECT
VOLTAGE IN WINDOW (12); COLOR SHOWS
BATTERY TYPE]
11. LOCK FOR ALL CABLE TERMINALS AND
INDICATOR
12. WINDOW SHOWING BATTERY VOLTAGE
13. IN-LINE FUSE ASSEMBLY AND CONTACT
FOR +12 VOLT CONNECTOR (TRUCK HALF
OF BATTERY CONNECTOR ONLY) (SBE/SBX
CONTACT SHOWN)
Figure 23. Detail of Battery Connectors With +12 Volt Tap
16
