2200 SRM 1324
Technician Menu
Figure 14. Ctrl Handle Inputs Screen
Run Diagnostics
WARNING
The lift and lower functions are enabled when
the Run Diagnostics Menu is selected.
NOTE:
Once the Run Diagnostics menu has been se-
lected, you cannot return to the Diagnostics menu.
The only way to exit Run Diagnostics is to cycle the
key switch.
From the Technician Menu, enter Diagnostics and
scroll down to and select Run Diagnostics. The horn
will sound twice when entering the Run Diagnostics
menu. A series of submenus are available inside the
Run Diagnostics menu. See Table 6.
To scroll through the Run Diagnostics menu, press
both the RH LIFT [#4] and the LH LIFT [#1] switches
and hold until the menu changes (approximately 7
seconds). Exit the Run Diagnostics by cycling the key
switch. See Figure 15.
Figure 15. Run Diagnostics Screen
11
