I1 Model
The Model parameter displays the model of the lift
truck and does not have any functions. It is for in-
formation only.
I3 Serial Number
The Serial Number parameter displays the serial
number for the lift truck and does not have any
functions. It is for information only.
I5 Truck Voltage
The Truck Voltage parameter displays the voltage
of the lift truck and does not have any functions. It
is for information only.
SETTINGS
The Settings menu contains parameters which af-
fect various lift truck settings. See . Scroll through
the Settings menu using the UP (#1) and DOWN
(#3) buttons and press the RIGHT (#2) button to
enter the desired selection. Press the LEFT (#4)
button to return to the previous menu.
S1 Metric
Use this parameter to select the units used to dis-
play information on the display. This parameter
can be set to either ENABLE or ENABLE. If set to
ENABLE, all units such as speed, distance, weight,
etc. will be shown in metric units. If set to DISA-
BLE, all units will be shown in English units.
S2 User Performance
NOTE:
This parameter is used with the "S6 PASS-
WORDS" parameter. Both the passwords parame-
ter and this parameter must be set to ENABLE to
allow full use of the User Performance settings
Use this parameter to ENABLE or DISABLE the
use of Performance Levels. If set to ENABLE, the
individual Performance menus P1, P2, P3, and P4
are active. If set to DISABLE, these performance
settings will be removed from the visible menu
structure.
S3 Timeout
Use this parameter to adjust the amount of time
the lift truck can remain inactive before activating
automatic power shutdown. Set the parameter to
any value between "1" minute and "59" minutes.
Setting this parameter to "0" will disable this func-
tion. If the system shuts down after timing out, the
key must be reset to enable lift truck operation.
S4 Battery Type
Use this parameter to select the battery type used
in the lift truck. Select the type of battery in use;
FLOODED, MAINTENANCE FREE, or OTHER.
Use OTHER if the lift truck has a fuel cell instal-
led. Selecting either FLOODED or MAINTE-
NANCE FREE will pre-select the values used for
S6 thru S9. If OTHER is selected, BDI functions
will be disabled.
2200 SRM 1631
Service-Level Menu
11
