Controls and Instrument Panel
2
─
31
─
Forward
Neutral
Backward
Levers
1. Direction control lever
This is used to changeover from forward
and reverse travel.
Parking
brake lever
Adjusting knob
● This lift truck has a neutral switch. The engine will not start at a position
other than neutral.
● Always changeover the shift lever from forward/reverse when the lift
truck is stopped to protect the equipment and for safety.
ADVICE
This truck series have the safety alarm. If the operator leaves at the operator seat
with the Fwd/Rev lever not in neutral, warning alarm sounds even on the key
switch “off”.
Return-to-neutral Warning Alarm
2. Parking brake lever
When parking the lift truck, parking brake
should be put on. The parking brake can
be put on by pulling the parking brake
lever backwards all the way. Also, by
turning the adjusting knob, how the brake
is put on can be adjusted. (Please refer to
page 100, for how the adjustment can be
made.)
Push the top button to release the lock
on the lever after pulling the lever a little.
Then the lever is moved to release the
parking brake.