Inspection
6
─
89
─
● Always use genuine parts for the replacement parts.
● Always use the correct oil and grease when oiling and lubricating.
● Always park the lift truck on a flat and rigid place before starting
inspection or servicing.
● When inspecting the lift truck indoors, make sure that the area is well
ventilated.
● When two or more workers are carrying out the work, confirm each step
with signals.
● Use proper tools, and do not use makeshift tools.
● Wear protective equipment (helmet, safety boots, goggles, gloves, etc.),
and proper work clothes.
● Lower the forks to the ground before starting the inspections. Make
sure that all operation levers are set to neutral.
● When raising the forks to inspect under them, make sure to place a
wood block, etc., between the forks, mast inner frame and ground to fix
them so that they will not drop down.
● Do not place your foot under the forks.
● If any abnormality is found during the inspection, report the state to
the supervisor, and never operate the lift truck until the repairs are
completed.
● Improper disposal (disposal in sewage or ground, burning, etc.)
of the waste oil obtained when the oil is replaced, etc., can lead to
contamination and soil or atmospheric pollution. This may also be
banned by law.
CAUTION