Tilt Cylinder Stroke and Mast Tilt Angle Adjustment
2100 SRM 103
4.
If the mast does not move, open the gate valve
and check the movement again.
If the mast
moves forward when the gate valve is open,
check for leaks in the hydraulic lines and fit-
tings. If no leaks are found, the main control
valve can be worn or damaged. Remove the load
from the forks when the checks are complete.
Table 1. Movement Rates (Maximum) for Tilt Cylinders
HYDRAULIC OIL TEMPERATURE/MAST TILT RATE
20 C (68
F)
60 C (140
F)
LIFT TRUCK MODEL
mm/min
in./min
mm/min
in./min
A1.00-1.50XL (A20-30XL)
1.3
0.05
9.1
0.50
E1.25-5.50XL,XM (E25-120XL)
0.8
0.03
5.0
0.20
J1.60-2.00XMT (J30-40XM)
0.8
0.03
5.0
0.20
E2.00-3.20XM (E40-65XM)
0.8
0.03
5.0
0.20
J2.00-3.20XM (J40-60XM, J40-60XM
2
)
(A216)
0.8
0.03
5.0
0.20
J2.00-3.20XM (J40-60Z) (A416)
0.8
0.03
5.0
0.20
H1.25-1.75XL (H25-35XL)
0.8
0.03
5.0
0.20
S/H1.50-1.75XM, S/H2.00XMS
(S/H25-35XM, S/H40XMS)
0.8
0.03
5.0
0.20
H2.00-3.00XL (H40-60XL)
1.1
0.04
7.3
0.30
S/H2.00-3.20XM (S/H40-65XM)
1.0
0.04
6.8
0.30
H3.50-7.00XL (H70-155XL)
1.3
0.05
8.9
0.34
H8.00-16.00XL (H165-360XL)
1.8
0.07
11.7
0.05
H8.00-16.00XM (H170-360HD)
1.8
0.07
11.7
0.05
H20.00-32.00F (H440-700F/FS)
1.3
0.05
3.8
0.15
H36.00-48.00C (H800-1050C)
1.3
0.05
3.8
0.15
J2.00-3.00XL (J40-60XL)
0.8
0.03
5.0
0.20
J25-35A,B
1.3
0.05
3.8
0.15
S1.25-5.50XL (S25-120XL)
0.8
0.03
5.0
0.20
S6.00-7.00XL (S135-155XL)
1.2
0.05
8.2
0.32
Tilt Cylinder Stroke and Mast Tilt Angle Adjustment
Adjust the tilt cylinders as described in the section Mast.
10
Summary of Contents for H3.50-5.50XM
Page 4: ...THE QUALITY KEEPERS HYSTER APPROVED PARTS...
Page 19: ......
