1.
CARRIAGE BARS
2.
HOOK FORK
3.
BLOCKS
Figure 30. Remove a Hook Fork
Forks, Inspect
WARNING
DO NOT try to correct fork tip alignment by bending the
forks or adding shims. Replace bent forks.
Never repair damaged forks by heating or welding.
Forks are made of special steel using special proce-
dures. Replace damaged forks. Forks are to be
replaced only in sets and not individually.
1.
Inspect the forks for cracks and wear. Check that the
fork tips are aligned as shown in
. Check that the
bottom of the fork is not worn (item 4 in
).
2.
Replace any damaged or broken parts that are used to
keep the forks locked in position. See
.
Maintenance
165
Property of American Airlines