You can enter the digits 0-9, A-F.
To enter A,B,C,D,E,F, hold down the [PTT] key, then
enter 2, 5, 8, 0, *, # respectively.
3. Press the [#] key, “— — —” appears on the LCD
indicating the memory location.
4. Enter the desired memory location number (01
¡«
32).
5. Press the [#] key again to store the DTMF number into
the memory location.
If you enter a wrong digit or decide not to dial the number,
press any key other than the power switch on the front
panel to exit.
¡ö
¡ö
¡ö
¡ö
¡ö
Confirm Stored DTMF Numbers
1. Press the [*] key, “A— — ” appears on the LCD.
2. Enter the desired memory location number (01
¡«
32).
The stored DTMF number or caller ID is displayed on the
LCD. Press any key other than the [PTT] key, the original
display is restored.
¡ö
¡ö
¡ö
¡ö
¡ö
Dial Stored DTMF Numbers
1. Press the [*] key, “A— — ” appears on the LCD.
Basic Operations
2. Enter the desired memory location number (01
¡«
32).
The stored DTMF number or caller ID is displayed on the
LCD.
3. Press the [PTT] key to place the call.
¡ö
¡ö
¡ö
¡ö
¡ö
Clear Stored DTMF Numbers
1. Press the [#] key, “D— — — — —” appears on the LCD.
2. Press the [#] key again, “D Clear” appears on the LCD.
3. Enter the desired memory location number (01
¡«
32).
To cancel the process, press any key other than
[0]
¡«
[9].
4. Press the [#] key, the stored DTMF number is cleared.
¡ö
¡ö
¡ö
¡ö
¡ö
Redial
1. Press the [*] key, “A— — ” appears on the LCD.
2. Press the [0] key twice, the last number (16 digits
maximum) you dialed is redialed.
The redialed number is displayed on the LCD.
3. Press the [PTT] key to place the call.
Note:
The redial memory is cleared when the radio is turned
off.
21
ＴＭ８００．ｐ６５
2005-6-29, 10:16
22
