S580/4
OPERATING INSTRUCTIONS
1. Slowly pull the hose from the reel. A clicking noise will be heard for
every half revolution of the reel.
2. To latch the reel, pull the hose to the desired length and then allow it to
retract slightly until you here a second or third click. The hose is now
latched.
3. To unlatch, slowly pull out the hose from the reel until the clicking stops
and then slowly let the cable retract until the hose bumper rests against
the reel guide.
MAINTENANCE
•
WARNING – DISMANTLING OF THE UNIT BY UNSKILLED
PERSONNEL COULD PROVE HAZARDOUS AS THIS UNIT
CONTAINS PRELOADED SPRINGS.
•
To adjust the tension of the reel you will need to add or remove wraps
of hose from the reel one wrap at a time until the desired tension is
achieved. Add wraps to increase tension, remove wraps to decrease
tension.
WARNING - ALWAYS ENSURE THAT THE REEL IS CORRECTLY
SECURED
AND LATCHED WHILST UNDERTAKING THIS
PROCEDURE TO PREVENT INJURY.
•
Clean the reel using warm soapy water. Do not clean using solvents
that may damage the reel casing or hose.
