User Manual
Debugging
39
6.2.1
Querying Parameters
To manually query parameters of the selected device, click
Query Parameter
.
If you click
Auto Query
, PSS will query all the parameters of the selected device every two seconds.
In the
Scan
list, click on the device and check
Select All
. Click
Query Parameter
, the parameter values
will be displayed in
Status
.
Note
To query a specific parameter, check the parameter name and click
Query Parameter
.
To query all parameters on the line, click the blank tab above the checkbox as shown in the figure
below.
6.2.2
Setting Parameters
1. In the parameter list, click the blank space under
Setting
tab from the same row the parameter locates
(the parameter is thus checked by default), enter or select a value. For the detail description of each
parameter, see chapter
Appendix: Parameters
.
a. (Optional for channel-selective devices) Select
Parameter Settings
tab, and turn on the channel
switch of the current BS, then set the corresponding uplink and downlink working channel frequencies.
Other spare channel switches need to be turned off.
Summary of Contents for DS-9300
Page 1: ...User Manual...
