Transmitting
After detaching the wireless earpiece from
the adapter, you can hold down the PTT key
on the wireless earpiece or the PTT key on
the adapter to make a call.
Powering On/Off
The wireless earpiece will give ring indication
(you can hear it only when you are wearing
the wireless earpiece) upon power-on/off.
Powering On
● Automatic power-on: When attached
to the radio via the adapter, the
wireless earpiece will be powered on
automatically when the radio is turned
on.
● Manual power-on: When the wireless
earpiece is not attached with the
adapter, you can power on the wireless
earpiece by long pressing the PTT key
on it. The adapter can be powered on by
turning on the radio only.
The LED indicator flashes after the wireless
earpiece is powered on. Please refer to LED
Indication for indication details.
Powering Off
To power off the adapter, turn off the radio.
To power off the wireless earpiece, long
press the PTT key after the BT connection is
disconnected (the LED indicator flashes blue
slowly). The LED indicator goes out when
the wireless earpiece is powered off.
LED Indication
Caution:
●
When the wireless earpiece is being
charged on the adapter, the LED
indicator glows red when charging
i s i n p ro c e s s a n d g l o w s b l u e
when the wireless earpiece is fully
charged. In this case, the following
indications are not applicable.
You can identify the status of
the wireless earpiece via the LED
indication of the adapter. You can
