4
2. Basic Operations
2.1 Turning the Product On or Off
1.
Connect the product to the power supply through the power adapter, or attach the battery.
2.
To turn the product on or off, long press the
Power Button
.
If the power adapter is disconnected from the power supply and no battery is attached, the product will
automatically turn off. Then, when the power adapter is reconnected to the power supply, the product will
automatically turn on again.
2.2 Switching the Channel
In standby mode, press the
Volume/Channel Up
key or the
Volume/Channel Down
key.
The current channel code appears on the LED seven-segment display.
2.3 Adjusting the Volume
1.
Long press the
Volume/Channel Up
key for 5s to switch from channel mode to volume mode.
2.
Press the
Volume/Channel Up
key or the
Volume/Channel Down
key to increase or decrease the volume.
If you do not make any operation for more than 5s, of if you long press the
Volume/Channel Up
key again
within 5s, you can press this key to only switch the channel.
2.4 Making a Call
Prerequisite
You have purchased the remote speaker microphone (RSM).
The TX channel has been preprogrammed to the digital channel or mixed channel by your dealer.
If the mixed channel is preprogrammed, you need to set the channel to digital channel on the product.
The TX contacts have been preprogrammed by your dealer.
Procedure
1.
Connect the RSM to the product.
2.
Press and hold the
PTT
key on the RSM, and then speak.
