l
You transmit the preprogrammed disconnect code in the same way as
the connect code.
l
The phone user hangs up.
In trunking mode, a phone call ends in any of the following cases:
l
The calling or called party ends the call.
l
The call duration exceeds the period preset by your dealer.
l
A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
All Call
Conventional Mode
An all call is a call from an individual user to all other users on the current
channel.
Trunking Mode
An all call is a call from an individual user to all other users in a specific BS,
area, or system.
According to whether the called party can respond, the all call is classified
into the following two types:
l
Broadcast All Call: The called party cannot respond to the call.
l
General All Call: The called party can respond to the call.
To set the type, go to
Menu
>
Settings
>
Radio Set
>
All Call
, and then
select
Broadcast Call
or
General Call
.
The radio must be authorized by your dealer for you to initiate an all
call.
Initiating an All Call
The following table describes how to initiate an all call in conventional
mode and trunking mode.
Mode
Manner
Operation
Conventional
Preset Contact
1. Rotate the
Channel Selector
knob to
select the channel associated with the
all call contact.
2. Press and hold the
PTT
key.
Contact List
1. Go to
Menu
>
Contact
>
Contact List
.
2. Select the all call contact.
3. Press and hold the
PPT
key.
Trunking
One Touch Call
Press the preprogrammed
One Touch
Call/Menu
key.
ReDial Call Log
1. From the home screen, press
(if
preprogrammed as the
ReDial
key).
18
