7
Priority Channel Scan
Suppose there is a scan list of 5 channels and CH is
prioritized as Priority Channel , the scan operation may
proceed in the following sequence, as shown in Figure .
Figure Priority Scan Sequence
Scan On/Off
There are three ways to access Scan mode:
. When the radio is in Standby mode, press the
programmed Scan key on the channel assigned
with a scan list.
. When Auto Scan is enabled for the channel
assigned with a scan list, the radio will start to scan
automatically when it switches to the channel.
3. Enter the main menu, select “Scan → On”, and
press
to confirm.
There are seven ways to exit from Scan mode:
. Press the programmed Scan key again during
scanning.
. The radio will automatically exit from Scan mode
when switches to a channel with no scan list or with
Auto Scan off.
3. Enter the main menu, select “Scan → Off”, and
press
to confirm.
4. Press the Call key to transmit.
5. Press the PTT to transmit (except PTT ID).
6. Start the Emergency function.
7. Turn the radio off.
Advanced Operations
