＊
There is wind speed function memory when plugged in.
●
ECO function
＊
ECO function can only be operated with the remote control.
＊
Press on the icon, the fan speed will automatically change as per the table below.
Room temperature
Fan speed
＜
23°C
2
23 to 25°C
4
25 to 27°C
6
27 to 29°C
8
29 to 31°C
9
31 to 33°C
10
＞
33°C
12
●
Timer
＊
When the fan is standby state, you can use the timer button to set an interval
between, in 30 minute segments, 1 to 6 hours after which the fan will turn ON.
＊
When the fan is turned on and running, you can use the timer button to set an
interval, in 30 minute segments, between 1 to 6 hours after which the fan will turn
OFF.
●Oscillation Buttons (
OSC)
＊
This button can be used to start and stop the sideways oscillation left and right. Press
once to turn the oscillation on and press again to stop the motion, in doing so you can
fix the direction of the fan.
＊
The up and down angle can be fixed manual by hand, please one hand on the base
and one hand on the top of the fan and gently move the head up or down as
required.
●
Remote control
＊
(Light): Press this button to turn off all lights of the fan. Press any other button to turn
on the light.
＊
(Mute): Press this button, all the fan button prompt sound is off, press this button
again, the sound is on.
＊
Before use, please remove the insulator from the battery box.
＊
The receiving distance of the remote control is about 3 meters, and the receiving
Angle is about 30 degrees to 45 degrees.
＊
If the remote control is close to the fan but cannot be used, please replace the
battery.
＊
Incorrect installation will result in battery leakage and corrosion, and damage to the
remote control.
＊
When the remote control is not used for a long time, please take out the battery to
3
