6
APPLICATION CONDITIONS
This log splitter is a home use model. It is designed for operating under ambient
temperatures b5
o
C and 40
o
C and for installation at altitudes no more than 1000m
above M.S.L. The surrounding humidity should less than 50% at 40
o
C. It can be stored or
transported under ambient temperatures between -25
o
C and 55
o
C.
This machine must be used and fixed on suitable work table to comply with the height of the
control actuators between 850-1650mm from the ground.
SPECIFICATIONS
Model Number
HFBE525T
Motor
230V~
50Hz 1500W S3 50% IP54
Log Capacity Diameter
5 - 25cm
Length
52cm
Splitting Force
5T
Hydraulic Pressure
20Mpa
Hydraulic Oil Capacity
3.3L
Overall Size
Length
1360mm
Width
480mm
Height
670mm
Operating speed
2800min-¹
The diameter of the log is indicative – a small log can be difficult to split when it has
knobs or a particularly tough fiber. On the other hand, it may not be difficult to split logs
with regular fibers even if its diameter exceeds the max. figure indicated above.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply which has
protection devices of under-voltage, over-voltage, over-current as well as a residual current
device (RCD) which maximum residual current rated at 0.03A.
TRANSPORTING THE WOODEN SPLITTER TO THE PLACE OF WORK
The log splitter is equipped with 2 wheels for minor displacements. To move the log splitter
to your workplace, roll log splitter at a slight angle after making sure the oil tank cap is tight.
Do not lift or carry the log splitter to move it.
Weight
59kg
