www.hyundaipowerproducts.co.uk
36
Maintenance & Care
Fuse Replacement
STEP 1 - Switch Off and Remove Control Panel
1. Before working on the unit, YOU MUST ensure it is NOT connected to mains power supply.
If unit is plugged into a power source, turn the machine switch to off position, turn the socket
switch off, then remove from socket.
2. With a 7mm Spanner OR Phillips Screwdriver, remove the 4 bolts in each corner of the control
panel as shown.
3. With the bolts removed, gently pull the control panel away from the unit body, exposing the
control board.
Rest the control panel on the unit frame, allowing it to hang may cause damage to the wiring.