background image

www.hyundaipowerproducts.co.uk

29

Recycling & Disposal

Recycling & Disposal

We do not offer a takeback scheme for the recovery of Waste Electrical Electronic 

Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or 

Batteries is passed onto you by us.

So when it becomes necessary to dispose of your machine you must take it to your 

local Civic Amenity Site. For further information please contact your local Authority  

for disposal advice.

You MUST make sure that all unused oil and fuel is disposed of correctly either 

beforehand or at your local Civic Amenity Site.

• Under NO circumstances must any fuel or oil be put down any drains.

• Certain products contain WEEE waste which should not be disposed of in your 

domestic waste.

• You MUST recycle WEEE in accordance with your local authority or recycling 

centre.

• Certain products contain batteries which should not be disposed of in your 

domestic waste.

• You MUST recycle batteries in accordance with your local authority or recycling 

centre.

• Unwanted packaging and materials should be stored and taken to a recycling 

centre so it can be disposed of in a manner which is compatible with the 

environment.

We are a Member of the VALPAK National Compliance Scheme and our 

registration number is RM08660. For further information about disposal please 

contact your Local Authority.

You can also get more advice and guidance about recycling at the following 

website http://www.recycle-more.co.uk

Should you pass this product on to another user either sold or loaned, you MUST 

pass on this user manual. This will make sure that all other users can use and 

maintain this machine safely.

1. Environmental protection should be a priority of considerable importance when 

using the machine, for the benefit of both social coexistence and the environment 

in which we live. Try not to cause any disturbance to the surrounding area.

2. You must comply with local regulations and provisions for the disposal of 

packaging, oils, fuel, filters, damaged parts or any elements which have a strong 

impact on the environment. This waste must not be disposed of as normal waste. It 

needs to be separated and taken to specified waste disposal centres where the 

material will be recycled.

3. You must comply with local regulations for the disposal of waste materials after 

mowing.

4. When disposing, do not pollute the environment with the machine, but hand it 

over to a disposal centre, in accordance with the local laws in force.

Environmental Protection

Summary of Contents for HYCW1200E





































Reviews: