Hyundai power products HYEA5200X, Instruction Manual

General Safety

10

• Always secure bore holes, otherwise there is 
a risk of injury.

• Drill the hole in the ground in several 
sections so you can remove the soil in 
between.

• The machine may only be used for its 
intended purpose. The user alone is 
responsible for unintended use of the 
machine. The manufacturer is not liable in the 
event of unintended use.

• People working with the machine must not 
be distracted.

• Only use the machine in a technically 
flawless condition, as well as for its intended 
purpose, in a safe manner and being aware of 
dangers, in compliance with the operating 
instructions. Disruptions which can affect 
safety in particular must be eliminated straight 
away.

• Do not touch rotating or hot parts.

• Do not smoke whilst using the machine.

• 

WARNING - 

The earth auger can catch 

clothes, string or wire and draw them in.

• Switch off the machine when not in use.

• Do not overload the appliance.

•  Do not touch the exhaust when the engine 
is running (risk of burns).

• The auger drill bit is capable of causing 
serious injury so AT ALL times you MUST 
keep hands and feet clear of all moving parts. 
Failure to observe these safety instructions 
could result in serious injury or death.

• NEVER attempt to unclog either the auger 
drill bit while the engine is running. 
Immediately shut off the engine. Allow the 
auger drill bit to come to a complete stop. 

• WARNING! 

If something breaks or an 

accident happens whilst working, you must 
turn off the engine immediately and move the 
machine away to prevent further damage. If an 
accident happens with injuries or third 
parties are injured, carry out the first aid 
measures most suitable for the situation 
immediately and contact the medical 
authorities for any necessary health care. 
Carefully remove any debris that might cause
damage or harm persons or animals should it 
not be seen.

• 

The excessive speed of movement or the 

absence of maintenance have a significant 
influence on noise emissions and vibrations. 
It is necessary to take preventive steps to 
eliminate possible damage due to high levels 
of noise and stress from vibration. You must 
maintain the machine well, wear ear protection 
and take breaks from working.

• 

Keep a firm hold on the handlebars with 

both hands when working.

• 

When leaving the machine, the engine must 

be switched off.

•

 Do not work by yourself, someone has to be 

close in case of emergencies.

• Do not lean too far forwards when working.

• 

Keep the earth auger vertical, do not twist it.

• Do not place the earth auger in dry grass or 
on flammable objects (fire risk).

• Immediately turn off the motor when you can 
feel changes to the machine’s behaviour.

• Ensure you have a safe position, during the 
drilling process as well.

• You must only drill holes in soil.

• When leaving the earth auger, the engine 
must always be switched off.