background image

15

General Safety

and blood circulation as well as large and 
long-lasting impact of shocks are considered 
factors in the formation of white finger. Note 
the following to reduce the risk of white finger 
and carpal tunnel syndrome;

• Wear gloves and keep your hands warm.

• Take regular breaks.

• All of the above precautions may help 
reduce the risk of white finger disease but not 
rule out the carpal tunnel syndrome. 
Long-term and regular users are therefore 
recommended to observe the condition of 
your hands and fingers. Seek medical 
attention immediately if any of the above 
symptoms should occur.

• The operating noise of the machine can 
damage your hearing. Wear hearing protection 
such as earplugs or ear defenders to protect 
your hearing. Long-term and regular users are 
advised to have hearing checked regularly. Be 
especially vigilant and cautious when hearing 
ear protection because your ability to hear 
alarm warnings will be reduced.

• Noise emissions for this equipment is 
unavoidable. Carry out noisy work at 
approved times and for certain periods. 
Limit the working time to a minimum. For your 
personal protection and protection of people 
working nearby it is also advisable for them to 
wear hearing protection.

         • See Certificate of Conformity section 
for Outdoor Noise declaration of conformity.

The HYEA5200X is a petrol earth auger from 
Hyundai. The HYEA5200X is powered by a 
52cc 2-stroke petrol engine.

This machine is a garden tool and precisely a 
pedestrian controlled earth auger. The 
operator is able to operate the machine and 
use the main controls, always staying behind 
the handle. 

The machine is manufactured according to the 
latest safety requirements. Every precaution is 
only effective when it is followed exactly.

Intended Use

The basic version of the equipment is an 
earth auger intended for private use, i.e. for 
use in home and gardening environments. It 
is designed for excavating planting holes, for 
perfolas and dences in light soil. It has only 
limited use on ground that is hard and stony 
and has many roots. The earth auger has been 
designed to be operated by one person.

User Types 

This machine is intended for use by 
consumers, i.e. non professional operators. 
The machine is intended for “DIY” and 
domestic use only.

Improper Use 

Any other usage not in keeping with the above   
mentioned ones may be hazardous and harm 
persons and/or damage things.

The equipment is allowed to be only used 
for its prescribed purpose. Any other use is 
deemed to be a case of misuse. The user/
operator and not the manufacturer will be 
liable for any damage or injuries of any kind 
resulting from such misuse. 

Noise

!

Intended Use

Summary of Contents for HYEA5200X









































Reviews: